You're using a Garmin model GPS and that it's supported.Ĥ. Make sure the computer port connection (USB or COM) is functional.ģ. The GPS unit is turned on and is physically connected to the computer.Ģ. If the program is unable to communicate with the GPS, check the following:ġ. Otherwise, it scans all of the COM ports and tries to detect an older Garmin model. The program automatically detects your GPS by first looking for a USB connected device. If you can't obtain altitude data from your unit, you can either ignore it or manually enter the altitudes for each image by double clicking on the image and then selecting 'Edit Altitude' from the resulting pop-up menu. Generally speaking, the newer Garmin models (like the Etrex and GPS 60) will while the older models (like the GPS 12) will not. Not all Garmin models support the transferring of altitude data. With the GPSmap 60CSx model, for example, this is done from the Tracks screen (Setup->Data Card->Log Track to Data Card). In that case, the tracklogs can be used by the program if you first enable that feature in the GPS unit. Some newer Garmin models save the tracklogs to removable media in GPX format where the trackpoint timestamps are preserved. Don't save your tracklogs in your older Garmin GPS units and expect to use them with the program.
Without timestamps, the tracklogs are of no use. This behavior is a relic of the days when memory was very expensive. When you manually save a tracklog to the internal memory of most Garmin models, the trackpoint timestamps are discarded. The GPS's interface mode must be set to the Garmin protocol.
Download gpx file to garmin 60csx serial#
The program supports older Garmin units having either a serial or a USB interface. You'll need the proper data cable for your specific model.
Download gpx file to garmin 60csx download#
If you're using an older Garmin GPS model, you can download the tracklog direct from the unit. Note that newer Garmin models save their tracklogs internally as GPX files and since your computer sees the newer units as connected devices, you can open the GPX files directly without having to actually download them. You can automatically download or import tracklogs by specifying the appropriate command line parameter. You can import up to 1,048,576 trackpoints at a time, but you should normally keep your totals much less than that to avoid the potential of running out of system RAM when the trackpoints are processed. This is handy if you need to diagnose why you got unexpected results when geocoding photos. You can view the imported tracklog data by selecting the main grid's 'Tracklog' tab.
Optionally, you can specify the UtcTimeBias preference option - this is the preferred method, but it requires that you accurately set it. This process can be problematic in some situations. By default, the program does this by looking at your computer's time zone information and whether daylight savings time is in effect for your location. To match the UTC times associated with a GPS tracklog to the local times associated with the photos, the program has to convert UTC time to local time. Click on 'File', 'Edit' or 'Help' to navigate the documentation
0 kommentar(er)
